NO | PART NAME | MATERIAL |
---|---|---|
1 | MOTOR | TEFC |
2 | V-BELT | RUBBER |
3 | HOUSING | GC |
4 | FAN ASS'Y | FRP |
5 | FAN STACK | FRP |
6 | HOT WATER BASIN | FRP |
7 | NOZZLE | PP |
8 | FILLER/ELIMIATOR | PVC |
9 | LOUVER | ABS/FRP |
10 | CASING | FRP |
11 | STRUCTURE | SS400+HDH |
12 | LADDER | SPP+HDG |
13 | COLD WATER BASIN | FRP |
14 | FOUNDATION | CON'C / H-BEAM |
Installation space is reduced and operating weight is minimized, using high efficiency packing materials specially
designed for cooling tower of vertically altemating current.
The power of fan is reduced by smoothing air flow due to bell mouth-shaped fan stack and energy is saved,
using packing materials with less pressure loss.
It has made been semi-permanent by using PP and PVC not to corrode, water to touch all parts within cooling tower,
and made corrosion resistant FRP for hot water basin, cold water basin and casing.
The cooling tower shall be manufactured, assembled and installed in the factory at the same time, so it has good quality
due to simple and rapid installation. The kind under 500R/T cannot need assembling process.